Engineering Management Dissertation Topics For Distinct Dissertations

Aims of the study
The aim of the study will be “To do an explorative study for understanding microgrid design, control, and performance evaluation for sustainable energy management in engineering manufacturing and management”.
Objectives of the study
The objectives of the study will be;

1. To understand the designs of a microgrid for the management of sustainable energy in engineering management.
2. To do the systematic review of the energy Management in Microgrids with Renewable Energy Sources.
3. To explore the management of energy in microgrids with non-renewable energy sources.
4. To explore the details about the optimization techniques for the microgrids.
5. To find out the methods of energy management based on metaheuristic methods.
6. To examine the methods of dynamic programming for energy management.
7. To evaluate the performance based on microgrid design using stochastic methods and robust programming.
8. To understand the role of an energy management model for the microgrids that includes the data acquisition system and the monitoring of meteorological variables.
9. To evaluate the differences in the design of microgrids and impacts on the evaluation of performance for management of sustainable energy in the engineering manufacturing system.

Aim of the study
The aim of the study will be “To do the critical study on biofuel supply chain restructuring. An investigation of how economically viable and environmentally sustainable second-generation biofuels are”.
Objectives of the study
The objectives of the study will be;

1. To understand in detail the restructuring of the supply chain of biofuels.
2. To explore the economic value for the adoption of sustainable second-generation biofuels.
3. To examine the utilization of new techniques in the restructuring of biofuels supply chains.
4. To examine the environmental impacts of the utilization of biofuels generation.
5. To address the current challenges involved in the commercial production of biofuels.
6. To review the technologies used for biofuels generation from first to the second generation.
7. To prepare the systematic review on the analysis of the restructuring of the biofuels supply chain and to examine its environmental viability.
8. To evaluate the recent advances in the generation of biofuels, the associated policies, standards, and technologies.
9. To find out the economic impacts of using biofuels produced by using the new engineering technologies.
10. To prepare a review on the utilization of technologies related to biofuel conversion.

Aim of the study
The aim of the study will be “To do the critical analysis of the application of computational intelligence for exploring and analysing system architecture and design alternatives”.
Objectives of the study
The objectives of the study will be;

1. To understand the uses and significance of computational intelligence in different fields.
2. To explore the applications of the utilization of computational intelligence in architecture and design.
3. To find out the role of computational intelligence to explore the design of architecture.
4. To examine the role of computational intelligence for the analysis of system architecture.
5. To prepare a review on finding out the uses of computational intelligence in the field of architecture.
6. To find out the positive and negative impacts of using the techniques of computational intelligence in the field of architecture and design.
7. To explore the financial cost associated with the use of incorporating the techniques of computational intelligence.
8. To find out the economic and environmental benefits associated with the use of the technique of computational intelligence.
9. To find out the changes and innovations in the practices of computational intelligence in the past and present years.
10. To find out the innovations in the architecture design using the techniques of computational intelligence.

Aim of the study
The aim of the study will be “To prepare a novel study to quantify restoration costs in the aftermath of an extreme event using system dynamics and dynamic mathematical modeling approaches. A case study for disaster management after tornadoes in the USA”.
Objectives of the study
The objectives of the study will be;

1. To review the case study of disaster management after the tornadoes in the USA.
2. To do the quantification of restoration costs associated with the events using the system dynamics in the USA.
3. To assess the restoration costs involved after happening of an extreme event of tornadoes using the mathematical modelling approaches in the USA.
4. To evaluate the geographical interdependency in critical infrastructure systems using open source geospatial data to model restoration strategies in the aftermath of a large-scale disaster.
5. To identify the significance of using the modelling and mathematical approaches in disaster management.
6. To examine the effectiveness of using the modelling approaches in the evaluation of financial costs as compared to using traditional approaches.
7. To prepare a systematic review of the procedures involved in the mathematical approaches and modelling of the restoration cost involved in disaster management.

Aim of the study
The aim of the study will be “To provide a novel approach towards data-driven decision-making tools for transportation work zone planning in urban areas of UK”.
Objectives of the study
The objectives of the study will be;

1. To understand the data-driven decision-making tools for transportation work zone planning.
2. To explore the traditional and recent approaches used for the decision making of planning the transportation work.
3. To analyse the use of data-driven decision-making tools associated with transportation planning in the urban areas of the UK.
4. To examine the techniques of data-driven urban management in mapping the landscapes.
5. To identify the risks associated with the driver behavior by the implementation of driver risk management system.
6. To find out the novel approaches used for the increase of work zone safety along with the
7. Physical and behavioral barriers in accident prevention.
8. To prepare a critical review on analyzing the approaches used in the planning of transportation zone planning in the previous and recent years.
9. To explore the uses of traffic simulators to determine driver response to work zone configurations.
10. To identify the significance of using work zone simulator analysis: driver performance and acceptance of alternate merge sign configurations.

Aim of the study
The aim of the study will be “To do the critical study on environmental hazard identification, assessment, and control for a sustainable maritime transportation system”.
Objectives of the study
The objectives of the study will be;

1. To prepare the review on the use of the sustainable approaches related to the maritime transportation system.
2. To identify the environmental hazard associated with the use of the maritime transportation system.
3. To evaluate the level and nature of environmental hazards associated with the use of the maritime transportation system.
4. To identify the approach that can be used for the control of environmental hazards associated with the use of maritime transport.
5. To find out the benefits concerning the uses and economic benefits with the use of the maritime transportation system.
6. To identify the hazard associated with the use of these maritime transportation approaches.
7. To examine the financial costs associated with the hazards generated due to the use of maritime transportation system.
8. To review the past control strategies used for the environmental hazards caused due to the use of maritime transportation and evaluate its effectiveness.

Aim of the study
The aim of the study will be “To identify the methods for the reduction of water pollution caused by the maritime transportation system”.
Objectives of the study
The objectives of the study will be;

1. To identify the hazards for the environment due to water pollution.
2. To explore the ways through which the maritime transportation system cause to increase water pollution.
3. To find out the impacts of water pollution on the environment.
4. To examine the ways through which water pollution can be reduced that is increased due to the use of the maritime transportation system.
5. To compare the methods of control of water pollution in the past years as compared to recent years.
6. To find out the technologies involved in the control of water pollution.
7. To explore the contributory role of using the maritime transportation system in the increase of water pollution.
8. To find out the economic loss involved in the restoration of the environment contaminated due to the maritime transportation system.
9. To find out the impacts of increased water pollution on biodiversity and the ecosystem.
10. To find out the engineering practices that can be used for the reduction of water pollution generated due to the maritime transportation system.
11. To explore the link between the use of the maritime transport system and water pollution.

Aim of the study
The aim of the study will be “To analyse the improvement in engineering management after utilizing multi-level evolutionary algorithms for resources allocation”.
Objectives of the study
The objectives of the study will be;

1. To find out the multi-level evolutionary algorithms resource allocation utilizing model-based systems engineering.
2. To explore the new approaches that can be used for the resource allocation and management of engineering.
3. To do the review on the identification of techniques used for the engineering management after the utilization of algorithms for allocation of resources.
4. To do the comparison of multi-objective evolutionary algorithms and find out the recent advancement in the approaches and future challenges.
5. To do the critical analysis related to the utilization of the algorithms for resource allocation in the improvement of engineering management.
6. To find out the benefits associated with the use of algorithms for the management of resource allocation.
7. To explore the types of models that can be used for the improvement in the techniques of environment management.
8. To explore the applications and significance of evolutionary algorithms in project management.
9. To find out the positive and negative impacts of the utilization of algorithms in the engineering management approaches used for resource allocation.

Aim of the study
The aim of the study will be “To prepare a novel approach to narrow down the cognitive distance between engineers and customers. An analysis of using fuzzy cognitive mapping”.
Objectives of the study
The objectives of the study will be;

1. To find out the importance of cognitive mapping in improving the relationship between engineers and customers.
2. To explore the novel approach that can be used to reduce the cognitive distance between engineers and customers.
3. To review the approaches that have been used in the past years for narrowing of the cognitive distance.
4. To propose a novel method, for the decrease of cognitive distance that allows teams to systematically, holistically, and iteratively assess alternative product concepts and their respective impact on customer value by modeling them as combinations of product design factors.
5. To explore the factors that can lead to a reduction in the association between customers and engineers.
6. To find out the impacts of the proposed novel approach in improving the cognitive association between the engineers and their customers.
7. To examine the practical contribution related to theoretical and methodological improvements.
8. To find out the methodological innovations for the provision of several approaches for measuring cognitive distance based on survey data and Fuzzy Cognitive Maps that can be used for the interpretation of a complex system.

Aim of the study
The aim of the study will be “A novel study on technological assessment model for developing geothermal energy resources for supporting electrical system. A case study of Iceland”.

 
Objectives of the study
The objectives of the study will be;

1. To review the technological assessment model that had been used for the development of resources of geothermal energy.
2. To explore the assessment model of technology that can be used for the resources of geothermal energy to support the electrical system.
3. To review the case study of ice land on the identification and implementation of the technological model for the development of resources of geothermal energy to support the electrical system.
4. To examine the approaches used for the utilization of geothermal energy in Iceland.
5. To compare the past and present approaches for the utilization of geothermal energy resources that have been used for the support of the electrical system.
6. To assess the cultural factors involved in the development of geothermal energy resources for supporting the electrical system.
7. To explore the environmental factors associated with the use of exploration of geothermal energy resources.
8. To find out the economic cost involved in the development of the technology used for developing geothermal energy resources.

Aim of the study
The aim of the study will be “An evaluation of technology planning for aligning emerging business models and regulatory infrastructures. A case study of developing a smart grid for electric vehicle charging”.
Objectives of the study
The objectives of the study will be;

1. To find out the emerging business models for the regulation of infrastructures.
2. To review the case study used for the development of a smart grid system for electric vehicle charging.
3. To explore the processes of technology planning for finding out the association between the business models and regulation of infrastructures.
4. To assess and examine the previous studies on the infrastructure and enabling environment for the electric road transport system in different countries.
5. To find out the impacts of technology planning on the business modeling and regulation of infrastructures.
6. To prepare a systematic review of the past and present research studies used to explore technology innovation.
7. To develop business models for smart grid technologies and to examine the systemic perspectives.
8. To explore the uses and applications of a smart grid for the enhancement of energy efficiency and renewable energy technologies.

Aim of the study
The aim of the study will be “To develop a novel approach for the decrease of time to market for a medical device and exploration of new methods for the product development process”.
Objectives of the study
The objectives of the study will be;

1. To prepare a novel approach for reducing the time to market for a medical device.
2. To examine and explore the methods for the product development process.
3. To prepare a critical review on the development of approaches used for reducing the time to market for medical devices and to check the evaluation of these methods for the product development process.
4. To provide the framework for the successful development of products and processes.
5. To examine the complexities in the development of new products and the mechanism behind the employed approaches.
6. To find out the marketing strategies for the promotion of new medical devices and equipment.
7. To compare the past and present methods for the product development processes and to find out the mechanism associated with the product development process.
8. To find out the technologies involved in the development of medical products and to explore the economic cost involved in the processes.